Pages Menu
Categories Menu

Posted by on Jan 22, 2016 in Locksmith Information |

What To Do When The Car Ignition Won’t Turn

What To Do When The Car Ignition Won’t Turn

The car ignition not turning is more common than you may think but it can be so frustrating and time consuming. Besides twisting the car key in all direction, it still does not budge even an inch. In most of the cases, the car ignition is not the problem; there are several possible causes why the ignition key sometimes fails to turn, some are dependent on the car model or the situation you are in. Fortunately, thanks to the guys over at Beverly Hills Locksmith, there are certain approaches that you can take when the car ignition will not turn, before considering to call a locksmith or mechanic to assist you.

Some of the main reasons why the car ignition fails to turn are:

  • The ignition lock cylinder is worn out

Ignition cylinderIn order to start the engine, a key should be inserted in the ignition lock cylinder. The ignition lock cylinder is an essential security device which prevents the car from being started without the key. The ignition lock cylinder also acts as a switch to turn off and on the engine, lights and interior functions. The ignition lock cylinder is made of tumblers and pins which ensure that only the right key starts the engine and if the tumblers are worn out, the ignition lock cylinder will not turn even when the correct key is used.

  • The battery is dead

If the car battery is dead, then the key will remain stuck and fail to turn

  • There are some lose cables

A lose cable either behind the ignition or inside the dashboard will also make the car ignition not to turn.

  • The car is not in park

Even if the gearshift lever is in pack, the car shift lock solenoid or another related mechanism may be faulty.

Here are some simple checks that you can perform before considering to call a mechanic:

Check the position of the key

Check to ensure the key in the ignition switch is in the correct position. As the ignition lock cylinder ages, it gets easy to turn to the wrong position which happens especially if the car key is attached to other heavy objects. This puts pressure on the cylinder promoting excessive wear.

Move the steering wheel

Move Steering WheelTry and gently move the steering wheel back and forth while trying to remove the key from the lock position gently. Sometimes the steering wheel locks making the ignition switch to keep the key locked until the steering wheel is unlocked. Remember not to use excessive force when removing the key, focus more on unlocking the steering wheel.

Check the car battery

A dead battery will prevent you from turning the key since the key chip cannot be identified by the car’s theft deterrent system. If the dashboard did not light up when the key was on, then the car battery could be dead.

Test the parking position

The shifter should always be in park to be able to remove the key. If you are still able to move the gearshift lever out of part when the car is off, then the linkage maybe worn out making the car ignition not to turn.

If the above checks do not work in making the key turn, you should contact a mechanic for thorough inspection.

Read More

Posted by on Jan 22, 2016 in Locksmith Information |

Is It Common to Get Your Key Stuck In the Ignition?

Is It Common to Get Your Key Stuck In the Ignition?

Vehicles are man-made machines that are prone to a lot of problems. Occasionally, things may go wrong, more so when the vehicle is not taken care of. In this regard, it is worth noting that proper maintenance is paramount to reduce the total expense in the long run. One of the most troublesome yet stressful thing that might happen is having your key stuck in the ignition while the car is still running. There are various reasons that can lead to this situation, but some of them are easy to fix. Several cases have been reported triggering the question “is it common to get your key stuck in the ignition?” How often the key may get stuck depends on the condition of both the key and the ignition system. To determine how often this might happen, first consider some of the common causes of the same, brought to us by the guys at www.azignitionrepair.com.

What causes keys to get stuck in the ignition?

Failed shifter

failed shifterOne of the main causes of having the key stuck in the ignition is a malfunctioning shifter. In most cases, it happens when the automatic transmission shifter fails or a wire breaks near it, thus causing the key to get stuck in the lock cylinder. When this happens, the right signals to disengage the key are not sent hence the problem.

Damaged ignition

The ignition system also may be damaged making it hard to extract the key. If the ignition lock has a problem internally, then you need to get an experienced locksmith to help you solve the issue. The transmission may also be damaged making it difficult to be set into ‘park’, but cycling the transmission severally at times will release the key.

Use of damaged or bent key

bent keyWhen one or more of the metal burs on the key catch the inside of the ignition lock, then removing the key will be a challenge. The key may be broken inside the lock cylinder or bent in a manner that friction between it and the cylinder is immense, thus making it difficult to remove it.

Malfunctioning anti-theft device

The column lock mechanism may fail to function as required. It leads to challenges when removing the key after parking the car. A sensor in the transmission that might be attached to the anti-theft device may also fail to transmit a signal to the lock and the key cannot be removed.

Forced key into the ignition

If the key was forced into the ignition cylinder, then you expect some challenges when removing it. It may sit in an angle that prevents its removal or it may be having some substances as it was being inserted in the cylinder. If the substance is a solid and not easily frozen by a liquid, then removing the key will be a problem.

There are other factors not discussed above that can cause the key to get stuck in the ignition. With various causes, it shows that it is common to get your key stuck in the ignition. Some causes are easily diagnosed and corrected even without the help of an expert. However, some may be daunting to correct and they may lead to further problems if not carefully handled. Avoid taking chances and seek the help of a qualified locksmith to help you solve the problem in a remarkably short time. Below are some tips to help you select the best locksmith.

• Always get referrals. With hundreds of locksmiths in the market, getting low quality services yet at a high cost is quite easy. Get a recommendation from a friend or relative who had a similar problem and got it fixed.

• Consider reputation and level of education. Quality services are directly associated with skills. It is obvious that an experienced and well trained locksmith will offer quality services compared to a non-trained service provider.

• Licensing and insurance. To get value for your money in a remarkably short time, consider seeking help from a licensed and insured locksmith. You are assured of quality services and financial compensation in case anything goes wrong while attending on your stuck key.

• Services offered. Some locksmith tend to specialize in one line of services while others perform multipurpose jobs. Ensure that your preferred locksmith is an expert in ignition system problems before getting into the contract.

Read More