Pages Menu
Categories Menu

Posted by on May 27, 2016 in Locks And Keys, Locksmith Information |

4 Reasons Why A Locksmith Is The Right Choice For Installing Exit Devices

4 Reasons Why A Locksmith Is The Right Choice For Installing Exit Devices

Like many other people, you may be asking why a locksmith is the right choice for installing exit devices. Maybe you had about it or are planning to fit it on your existing door. The exit device comes in various types and is designed to allow people to easily open a door even without activating the unlocking mechanism. By fitting the device on one side/secure side, the door will still open even when people crash on it when panicking. The device was developed following the infamous inferno in 1903 that engulfed the Iroquois Theatre that led to the death of more than 600 people. It minimizes the possibilities of people getting injured or accidents when many people try to rush through the opening. Rather than installing it by themselves or looking for other installer, people are advised to hire qualified locksmiths because of the following reasons:

1. Highly Knowledgeable about The Device

exit devicesMany people who are not experienced in lock and key service choose to install the exit device. They do so to save money and also because of the simplicity of the device. The traditional exit device resembles a long tubular bar that is attached to two latches at each end. It is installed on one side of an out-swinging door and gives access free egress while restricting access from the other side. This strategy lessens the chances of people bumping crashing or bumping on each other especially during a confusion or panic. Nonetheless, unless you are familiar with this device and have experience in installing it, chances of installing it in the wrong way are quite high. To avoid any errors , it’s best to led the professionals(locksmiths) handle it.

2. Gives You Options.

Do you know that there are several types of exit devices in the market? Following the 1903 theatre fire, the traditional exit device was created to avoid such incidences from ever occurring. Over time, newer and better devices were developed to enhance safe access so as to minimize the accidents or injuries. The effectiveness of each type is influenced by several things which include type of access, nature of door, personal preference and more. Most installers will simply bolt a device without focusing on its effectiveness. But, a locksmith will take time and analyze the most suitable device. Common types include the traditional crossbar(metal -tube) type, or the modern rim type, vertical rod or mortise lock.

3.Certified to Install Such Devices

exit bar installingThe main goal of exit devices is to improve access from the secure side while restricting entry from the other. It also makes it possible to easily and safely open the door even for those people who have no clue how the door opens or closes. This minimizes the possibility of people crashing onto each other particularly during a rush or confusion. Locksmiths are qualified and certified to install exit devices on various types of doors such as metal, wood, aluminum, steel or any other. They will focus on the security and free egress to avoid the re-occurrence of incidences such as the Iroquois Theatre fire. They will also help you choose the best type by focusing on the pull handle, level, stile, electrified or keyed trim.

4. Offers you Guarantee on Service

One reason you should always hire a locksmith to fit the exit device is guarantee on the service. You desire to enjoy maximum satisfaction from the device as well as service without having to regularly deal with breakdowns and malfunctions. You also want peace-of-mind knowing that the door will safeguard safe exit of people incase there is panic in the room. Top lock and key experts work with leading manufacturers and vendors who offer warranty on their products. And by relying on experienced and dedicated locksmiths, the service provider assures you on quality, longevity and good service.

It’s possible to fit the exit device on the door without the help of a locksmith. Maybe you will call your friend or neighbor to assist. But, is doing it by yourself worth the risk is people bumping on each other or remaining trapped inside a room? Of course not. This is why you should always hire experienced and credible locksmiths to install the devices on your door. Not will you be assured of reliability and safety but will have peace-of-mind.

Read More

Posted by on Feb 8, 2016 in Locks And Keys |

Choosing The Right Exit Device For Your Building

Choosing The Right Exit Device For Your Building

There are many exit devices required for offices, houses, commercial places and various types of structural buildings that have occupants. There are no shortcuts to getting your building up to code with proper exit devices and failure to conform to the statutory standards can lead to building closure or fines. Exit devices are only reasonable to install since the likelihood of fire outbreaks is something no one can predict. After the fateful 1904 Iroquois Theatre fire that led to the loss of 600 lives, the decision to review and design new locks that allowed safe exit in the event of emergency (like fire, bomb threats and building collapses) was made. This gave rise to different types of exit devices that are now required before a building is approved for use.
Resources:
Lakewood Co Locksmith
homedepot.com
sargentlock.com

Legally enforced exit devices

Getting your building up to code with proper exit devices should not be a daunting task since the requirements are quite basic and readily available. There are various strict standards and fire prevention codes that are enforced by the state to ensure homes, businesses and industries install suitable conforming exit devices that will protect employees, family and building occupants when an emergency occurs. The type of exit device to be installed in any given building will depend on a number of factors including number of occupants which has different rules for the type of doors, locks and exit devices. There are three main types of exit devices used in modern buildings. They include the following;

mortise• Mortise lock – This mainly comprises of a mortise lock lacking the deadbolt and it is usually mounted on the pocket section of the door. When you press the push bar, the spindle (tail shaft) rotates and releases a latch bolt that then enables the door to open in a swing. Mortise locks have been around for quite some time and are one of the approved exit devices.

• Vertical rod – This is a fairly new introduction in the market and uses a bolt mechanism exit device. When the door is locked, the deadbolt latch extends to the strike, and reduces the distance between the bolt and the strike.

Rim style exit device• Rim lock – Rim locks are definitely the most popular and vastly used exit devices in modern locksmith. The lock is named after its latching mechanism which is borrowed from the rim locks sold back in the early 20th century to the Midwest and East. The lock features a latch that extends on a surface mounted strike.

Locks are not the only exit devices required within the fire prevention safety codes. There are several other aspects of securing a building to make it safer during emergencies.

Panic and fire exit hardware

All doors must have a latching assembly that includes an activated door unlatching device during panic. When the device is pressed, the door should open on the engress direction. According to the code standard, the activating device should require a maximum force of 15 pounds to open the door in the engress direction. Any device that requires more force does not conform to the standards and the door should be opened by anybody trapped within the space. Fire doors should be able to self lock after every use and latch back to provide a smoke and fire barrier. As long as occupants are in the building, the fire doors can remain latched but never locked. Doors found in the stairwell should swing open and allow occupants to move into the corridor or another room. Like fire doors, they should latch but not lock or prevent occupants from coming down or going up.

Other safety codes

There should be fire exit doors that open in the engress direction without need for a key of specialist. Illuminated corridors, pathways and exit signs must also be installed to lead occupants to safe areas in case of fire or any emergency. Fire corridors and external exit doors are all part of the exit devices needed for every business, home and industry building. The scale and size of these devices all depend on the number of occupants housed within that building.
Getting your building up to code with proper exit devices is simply a necessity that can never be avoided or oversight. It does not only attract fines and possible building closure to neglect this requirement but also puts your building at risk endangering all occupants and limiting the possibility of salvaging and controlling fires among other emergencies. It is advisable to consult professional advice to find high quality devices and installation services.

Read More