Pages Menu
Categories Menu

Posted by on Oct 8, 2016 in Locksmith Information |

What Should I Do When My Key Gets Stuck In The Ignition?

What Should I Do When My Key Gets Stuck In The Ignition?

Admittedly, one of the most frustrating problems among motorists is an ignition key that will neither turn, nor come out of the ignition cylinder. Such scenarios not only leave the motorist stranded as the car cannot be started or stopped, they also pose a potential for danger especially on motorways. Several solutions could help the motorist who asks what to do when their key gets stuck in the ignition. And if you happen to be in Atlanta or surround areas, check out the website of ATL Locksmith Pros.

Check the ignition key’s position.

More often than not, the key gets stuck in the ignition because the motorist did not check its position. Whether in a hurry or just new to driving, a motorist is prone to mistake the key’s position leading to it getting stuck if it is not in the aDoff’ position. Some motorists turn the key from the allIstart’ position and exceed the aDoff’ position where the key is supposed to come out of the ignition cylinder. One characteristic of this problem is the inability of the key to come out of the ignition cylinder while the radio can still play. Therefore, the motorist must check that the key is in the correct position before making any further attempts to remove it from the ignition cylinder.

Check the steering wheel lock mechanism.

Most modern cars come equipped with a steering wheel lock mechanism that locks it in place before the ignition key can be removed from its cylinder. Due to wear and tear or damage to its pressure lock device, the wheel locking mechanism might not apply enough pressure to enable the steering wheel to lock. Consequently, the key cannot be removed from the ignition cylinder. In such cases, the motorist should jiggle the wheel or turn it forcefully until they hear the click which indicates it has locked.

Check the battery.

dead-batteryMost modern cars combine the wheel locking mechanism with the electrical system to ensure that the key can only be removed from the ignition cylinder after both have engaged or shut off. In some cars, the battery having insufficient charge to initiate the car’s secondary security measures, such as an alarm system, might prevent the key from moving out of the ignition cylinder. In such cases, the motorist should check that the steering locking mechanism is locked in place, before checking if the battery is flat. Should the battery be flat or have insufficient charge, the motorist should use jumper cables and another motorist’s battery to charge it enough for the key to be able to move out of the ignition cylinder.

Gently tapping on the ignition cylinder face or key itself.

ignition-cylinder-1Some older car models depend on ignition cylinders whose interior mechanisms resemble those used in door locks and padlocks. In such circumstances, one of the tumblers might lock in place preventing the key from coming out of the ignition cylinder. Similarly, a spring in the ignition cylinder might be inadequately depressed by the key meaning it cannot fully emerge from its position in the cylinder. In such cases, the motorist should use a small hammer or flat metallic surface to gently tap on the ignition cylinder face. If this fails to work, the motorist can gently tap on the key itself to see if either the tumblers of springs can be shocked into releasing the stuck key. However, the motorist should only use gentle force to avoid breaking the key or damaging the ignition cylinder.

Lubricate the stuck key.

Sometime dirt and grime accumulate in the ignition cylinder causing the ignition key to get stuck. In such circumstances, the motorist should first check for all other potential causes of the key getting stuck before resorting to lubricating it. When lubricating a key stuck in the ignition cylinder of a car, the motorist should always use the prescribed lubricants. These are; electrical contacts cleaner, silicone, or liquid graphite. First, the motorist sprays ample amounts of electrical contact cleaner into the stuck key to remove any grime or dirt. Next, a few drops of either liquid graphite or or silicone are added to lubricate the key which should then be gently removed from the ignition cylinder. If the process fails to work the first time, the motorist should repeat it until the key comes out. However, the motorist should take care not to spill any cleaner or lubricants on the dashboards, floor mats, or upholstery of the car to avoid stains and damage.

Read More

Posted by on May 14, 2016 in Locks And Keys |

What Kind Of Car Key Is The Most Reliable?

What Kind Of Car Key Is The Most Reliable?

If you are a car owner, there is one question you’ve probably asked yourself at least once in your lifetime: what kind of car key is the most reliable?

Perhaps the best way to answer this question is to consider aspects like durability, ease of use, etc. But before we look at some of the most reliable kinds of car keys available in the market, let’s first determine what may motivate you to question the reliability of your car key. Thanks to AZCarKeys.com for the useful info.

Although most folks hate to admit it, it is common knowledge that most car owners have been locked out of their car on one or more occasions. Such a situation can be infuriating, especially if you have to attend to an urgent matter.

Losing your car keys is not a matter of being careful; it is something that can happen to anyone at any time. With newer models, the issue is even worse, since keys are normally combined with a remote.

The best thing to do after undergoing such a horrendous experience is to seek the services of a professional automotive locksmith. Highly-experienced automotive locksmiths have the capability to handle almost all types of car keys, including the most recent ones.

Replacement

Locksmiths should be your best friend when it comes to the issue of car key replacement. Replacing car keys largely depends on the model of the motor vehicle in question. Newer models have a transponder embedded within the ignition keys. The transponder communicates electrically with the car, thus preventing theft.

In newer models, replacement doesn’t work unless the transponder is programmed to match your car. Apart from the transponder, newer models also come with an integrated fob, which has buttons for locking and unlocking doors. For experienced locksmiths, the model of the vehicle is not really an issue.

Here Are Reasons That May Prompt You To Consider Replacing Your Car Keys:

1. Losing keys
2. Replacement of a missing or broken transponder chip
3. When your car keys are snapped in the door lock
4. Damaged car keys
5. Being locked out of the vehicle
6. When you need a spare set of keys

Examples of some of the most reliable car keys; they answer our initial question (what kind of car key is the most reliable?)

transponder11. Transponder Car Key: It includes a microchip inserted inside the key handle. The microchip is essential for preventing car key fraud. It also promotes ignition security. The transponder car key is very difficult to duplicate, unless you have access to specialized equipment. Nevertheless, you can be sure that a professional automotive locksmith with proper transponder key systems can assist with replacement.

2. VAT Key: It incorporates a vehicle anti-theft system. For additional security, the system includes a resistor chip in combination with the blade. Note that the resistor chip contained in this car key differs from the microchip found in transponder keys. Just like the transponder car key, the VAT key is very difficult to duplicate.

Lincoln Key3. Smart Car Key: This recently developed car key type is not used by many. It is referred to as a “smart key” because it allows the car owner to operate the car remotely. Some of the tasks that can be performed remotely include opening and closing of doors, or even starting the car.

4. Valet Car Key: Just from the name you already know what the key is all about. It allows you to take the car effortlessly to a valet for parking and retrieving. This kind of car key has been modified to only allow to main operations: door locks and ignition. It is normally issued alongside a smart or transponder key.

5. Laser Cut Car Key: Although not very advanced, it is more secure compared to mechanically cut car keys. It is also called a sidewinders or internally cut key. Lasers are used to enhance precision during cutting. With lasers, it is easy to create grooves on either sides of the key shank, hence reducing the possibility of duplication.

This type of key is quite expensive, since the cutting process requires specialized machinery.

From the information highlighted in this article, you can see that a skilled automotive locksmith should be your go-to guy when you lose or break your car key. Forget about your car dealer for a second; it will take a long time to find a solution, and you’ll certainly part with a huge sum of money.

Here Is A List Of Cars That Most Locksmiths Replace Keys For

Buick
Cadillac
Chevrolet
Chrysler
Dodge
Ford
GMC
Hummer
Jeep
Lincoln
Mercury
Oldsmobile
Plymouth
Pontiac
Saturn
Acura
Audi
BMW
Daewoo
Daihatsu
Honda
Hyundai
Infiniti
Isuzu
Kia
Lexus
Mazda
Mercedes
Mini
Mitsubishi
Nissan
Rover
Saab
Scion
Subaru
Suzuki
Toyota
Volvo
Read More

Posted by on Feb 11, 2016 in Locks And Keys |

When Hiring A Locksmith…

When Hiring A Locksmith…

There are many occasions where you might find yourself in need of emergency locksmith services, from losing your car keys to locking yourself out of the house. Due to this fact, it is always advisable to have the number of a reliable service in the contact details of your mobile phone, for all those ‘just-in-case’ scenarios.

That said, it is important to check several aspects of the service on offer before you choose a provider to rely on; this can not only save you time and money but can also result in a reduced amount of stress should an unfortunate event such as locking yourself out of your home or office arise.
Resources:
Kent Locksmith
bbb.org

The first issue to consider for emergency locksmith services prior to hiring them is whether or not they have a call-out fee. In all cases, make sure you know in advance how much you will be required to pay in this scenario.

Next on the list of things to verify when looking for a reliable locksmith professional is which physical locations they cover. This point may seem like an obvious one, but make sure that you select a service that covers your workplace, the areas you travel to frequently and, of course, your area of residence.

You may require getting the details of several different emergency locksmith services to cover the entire range of the places you travel to, so be sure that all of these fit the criteria listed in this article. Having several numbers of people that you can call in an urgent situation can give you great peace of mind, and also provides an alternative should your first option not be available for mentioned reason.

TimeFourthly, be sure to inquire how long it normally takes for an instant door engineer to reach you in a case of an urgent situation. This can make a huge difference, as waiting outside in the cold and the dark can be quite uncomfortable and also unnerving, so you require to be assured of a rapid response.

Top emergency locksmith services will be able to offer general call-out times of around 30 minutes for an urgent scenario, although this trend understandably be longer in the non-urgent situations. Knowing that your door engineer will be with you as soon as possible can, again, bring you great reassurance should you find yourself in need of urgent assistance.

Number six on the list of things to check before hiring a locksmith service is whether or not there is any guarantee on any repairs they make or new items that they fit. The most renown companies will offer some financial reassurance such as this, so you not only get the best value for money but can avoid calling out a specialist once more in the very near future.

saving moneyFinally, our seventh tip is to verify the full prices of the company’s call-out services for fixing faulty locks, replacing locks, and entering vehicles and safes. Although there may not necessarily be a call-out fee, the actual charges themselves can be expensive, so don’t hesitate to check in advance the average prices charged for a full service.

Read More

Posted by on Feb 9, 2016 in Locksmith Information |

Most Common Car Ignition Problems

Most Common Car Ignition Problems

The ignition of an automobile is something that is often overlooked in routine maintenance schedules. However, the ignition is obviously an integral aspect of running your car-without it, you aren’t going anywhere. If you are having problems with your ignition (the most common being that it will not turn), there could be several causes of the problem. Whatever you do, do not force-turn the key while it is in the ignition. Keys are made of soft metal, which means if you use tools to force the key to turning, the key can easily break off in the ignition a much more complex and expensive problem than you originally started with. You can usually fix the problem in a few minutes of less by completing a few simple steps.
Resources:
rentonlocksmith.net
autozone.com
aa1car.com

Problem: Your steering column lock may be applying pressure to the ignition mechanism, prohibiting it from turning.

Solution: First, you will need to try to find a position where your key is able to turn in the ignition. Apply pressure to the key, as if you were going to start you vehicle, and gently turn the wheel from left to right until the key is able to turn.

Problem: The car is in the wrong position.

Solution: Many vehicles will not let you start the engine if the car is not in “park” or “neutral.” Check to make sure your car is in park, then try to turn the ignition.

dirty ignitionProblem: The lock cylinder is dirty.

Solution: Dirt and grime can prohibit your lock cylinder from functioning properly. Use electrical contact cleaner to remove the dirt from the mechanism. Then add a small drop of graphite lubricant. Do not use oil on the lock cylinder. Dust and dirt are attracted to oil. As the cylinders get dirtier, the tumblers will be prevented from moving, which means they will have trouble unlocking. Acceptable lubricants include graphite and silicone. Be sure to leave your car door open when cleaning the cylinder, as the fumes from the cleaner can be hazardous.

Problem: The tumbler is locked.

Solution: Tumblers (included on some lock cylinders) can get stuck in a locked position. Try tapping the lock cylinder with a tack hammer, which can cause the springs in the tumbler to release it from the locked position. If the car doesn’t make a noise when it is started, check the battery terminal connections and then look for other loose connections in the ignition systems.

bent keyProblem: Your key is bent.

Solution: While this is not the most common problem, your key can become bent, which will prevent it from fitting correctly in the ignition, and turning. Your key may not be visibly crooked, so lay it on a flat surface to see if the key is bent. If your key is bent, use a wooden block (or similar tool) to gently tap it back into its original shape (while it is laying on a flat surface). Again, do not use a metal hammer or similar object to bend your key, as keys are made of soft metal and can break easily.

Read More

Posted by on Feb 5, 2016 in Locksmith Information |

How Do You Get a Key Out of an Ignition?

car ignitionIt’s one of the most stressful and frustrating times of a driver’s life: you’re in a hurry, perhaps with a meeting, going to work, or picking up the kids for something. Regardless, you hop into your car only to discover that your key is stuck in the ignition. Making matters worse, you don’t want to leave your car to get help since having the key in the ignition might cause your car to be stolen. You also face the problem of wasting a lot of time by trying to get it out on your own. Luckily, there are a few things you can do to solve the situation.
Check the position of the key. Check the key to make sure that it is in the “off” position. A common problem is to turn the key too far when you turn your car’s engine off. You can usually tell if this is the problem if you can turn your car radio on. If the radio comes on, that means your key is in the “on” position, not “off,” which will keep the key in the ignition. Also, check to make sure that your gear shift is in the “park” position. Otherwise, you will not be able to remove your key from the ignition. Most modern automatic cars will not allow you to remove your key from the ignition in any gear except “park.”

Moving Steering WheelMove the wheel. Another technique to try is to move the steering wheel while trying to remove the key from the ignition. In many cases, the position of the steering wheel will lock the key in the ignition. Further, if this doesn’t work, try rocking the steering column back and forth to see if this releases the key from the ignition.

Check the battery. In some cars, if the battery is dead, you will be unable to remove the key from the ignition. If this is the case, trying to remove the key from the ignition might damage it. As a result, you will want to wait until your battery is recharged, or at least partially recharged before you attempt to remove the key.

Use a bobby pin. If nothing thus far has worked, you might want to consider using other household objects. All modern steering columns have an override that you could use. Find the access point on the steering column, remove the cap, then press the button located underneath the cap with a bobby pin. This releases the override and might allow the key to be removed. If that doesn’t work, find a pair of pliers or vise grips, attach them to the key, and GENTLY move the key forward and backward. There’s a good possibility that this will release the key. You need to be careful when trying this, however, since if you are too forceful with the movement, you could damage your ignition, bringing you more problems than you started with.

Try to loosen the key. Sometimes you can loosen the key from the ignition by using electrical oil, WD40, powdered graphite or a similar product to lubricate it. To do this, simply squirt a small amount gently into the space between the key and the housing of the ignition. Once again, you will want to move the key to see if this works, but when you do, you will want to be gentle so you don’t damage your ignition or break the key off in the lock.

Automotive locksmithCall a locksmith. If you have tried these suggested methods with no luck, it’s probably time to call a professional locksmith, such as those at Parker Locksmith. Even if you are in a hurry, it will pay you not to do something so forcefully that you damage the lock or break the key off in the ignition. This will only leave you in a worse position than you are in now. Even if it does take time for a locksmith to arrive, he will know how to fix the problem in as quick a method as possible, but more importantly, he will be able to do it without causing further–and more expensive–damage to your car’s lock. It is a much simpler option to call a locksmith after you have attempted the methods listed above than to damage your key, the ignition, or even your car in general. A locksmith from Parker Locksmith has not only the expertise, but the experience to remove your key as well as to understand and fix the reason you could not remove it.

Getting your key stuck in the ignition of your car isn’t as simple a problem as it is often assumed to be. Not only that, but add the issue of happening at the most inopportune time, and you could have a serious problem on your hands. Fortunately, with a call to Parker Locksmith, you will be on your way in as quick a time as possible, and with a solution to your situation that will probably remedy you from now on.

Read More